View LVCC9Z803YS_7821586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

c.y.chan q.c. dept. design manager design check designer date: edited on : jan. 29, 2008 lcd departmentelectronic materials division nan ya plastics corporation 201, tung hwa n. road, taipei tel:886-2-27122211 ext. 5993~5995 fax:886-2-27178253 e-mail:lcdsales@npc.com.tw customer approved by product no. : LVCC9Z803YS_ spec. no. : lm803-0-0 nan ya plastics corporation specification of lcd module
records of revision spec. no. : lm803-0 date revised no. ref. page /total page summary design check 01.29.08' 0 1~10/20 first issue c.y.chan
any materials (6 materials) or includes less than specifiedquantities which are regulated by rohs compliance. max. 7.50 (w) x (h) (d) without fpc 0.18 0.18 115.20 (w) x note: (4) (2) (3) mode/view angle y (4) s (2) reflective/transmissive z transmissive no. (1) item symbol backlignt c 3 y s (3) (1) definition led backlight 9 z 8 0 l v c c 13 weight g 125 (approx.) 12 touch panel excluded 11 dc/dc converter excluded 10 driver ic source:hx8250-a01b(cog) ; gate:hx8678-a000(cog) 9 backlight led 8 viewing direction 12 o'clock 7 rear polarizer color transmissive type 6 lcd display mode tft 5.7' , normally white / positive image 5 number of dots dot 640 rgb (w) x 480 (h) 4 active area mm (h) 86.40 2 module size mm 3 pixel size mm 125.00 (w) x 98.80 (h) x unit 1 product no. LVCC9Z803YS_ 1.mechanical data no. item contents 1 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08' rohs compliance color module, 12 o'clock option rohs compliance. nan ya guarantees that this project doesn't include
note 4 background color will change slightly depending on ambient temperature. that phenomenon is reversible. dgnd =0v note 1 lcm should be grounded during handling lcm.note 2 ta Q 70 : 75%rh max. note 3 please refer to item of reliability test. 2-1.electrical absolute ratings2-2.environmental absolute maximum ratings input voltage vi -0.3 vdd+0.3 power supply for analog avdd-agnd -0.3 13.5 wide temp. storage operating note 2,4 note 3,4 -30 humidity (without condensation) 80 min. ambient temperature() -20 item max. min. max. 70 comment note 1 vv unit v power supply for logic vdd-dgnd -0.3 7 item symbol min. max. static electricity 2.absolute maximum ratings 2 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08'
0 vgh vgl vcom recommended lc driving voltage for 25 by c.y.chan (1) vgh is tft gate on operating voltage.(2) vgl is tft gate off operating voltage, vgl signal must be fluctuates with same phase as vcom when storage on gate structure. (3) vcom must be adjusted to optimize display quality_crosstalk,contrast ratio and etc. rev/date 3.7 (note) 01.29.08' r0/ vv -10.0 vdd 0.3vdd 15.0 unit 10.0 v 3.3 3.6 3.0 input voltage avdd vdd-dgnd vih h level vil l level power supply for analog avdd-agnd vdd 3-1 sheet no. : item min. typ. max. 3-1.electrical characteristics of lcm 3.electrical characteristics symbol condition spec. no. :date : lm803-0 jan. 29, 2008 nan ya plastics corp. elec. materials div. lcd department specification power supply for logic 0.7vdd vdd=3.3v, avdd=10.0v vgh=15v , vgl= -10v pattern : all on (white color) recommended lc driving current for 25 i vdd ma 15.0 20.0 i ak =60ma pattern : all on (white color) 250.0 300.0 cd/m2 note : brightness l
ta=25 w 25000 hrs at i ak =60 ma (*1) led power consumption p f 1.4 24.5 v applied forward current i ak 60 ma applied forward voltage 210 ma 15 v v ak 23.1 maximum reverse voltage v r l l rev/date r0/ (*1) led life time is defined as follows : the final brightness is at 50% of original brightness. by 01.29.08' c.y.chan lcd department specification nan ya plastics corp. elec. materials div. peak forward current i p typ. max. led life time unit remark 3-2.electrical characteristics of backlight used led rating (constant current driving) item symbol min. lm803-0 jan. 29, 2008 3-2 date : spec. no. : sheet no. :
note 3,5 lm803-0 jan. 29, 2008 4-1 date : spec. no. : sheet no. : *a) 4.optical characteristics cr =10 12 o'clock 6 o'clock9 o'clock (viewing angle) response time tr+tf contrast ratio surface luminance with all white pixels 4-1 optical char. of lcd panel 50 unit max. note note 2,3 ms lcd department specification nan ya plastics corp. elec. materials div. 3 o'clock surface luminance with all black pixels (viewing angle) by 01.29.08' c.y.chan rev/date r0/ contrast ratio = c/r 150 250 60 60 80 parameter symbol min. typ. values 40 60 % *a) contrast ratio(cr) is define mathematically as : degree of saturation ntsc 53
ta=25 base on nan ya backlight (cie x=0.30 0.03 , y=0.30 0.03) spec. no. :date : sheet no. : nan ya plastics corp. elec. materials div. lcd department specification item 4-2.color of cie coordinate red color of cie coordinate green blue white lm803-0 jan. 29, 2008 4-2 note x 0.55 0.6 0.35 0.65 =0,=0 0.53 y y x 0.29 0.34 0.39 0.36 0.31 0.32 0.3 0.1 x 0.25 y 0.050.27 =0,=0 note note measuring at position 3 on fig.1 cie chromaticity diagram. by c.y.chan 0.37 0.63 symbol condition value min. typ. max. 0.15 0.19 0.14 y =0,=0 x =0,=0 0.09 0.41 0.58 rev/date r0/ 01.29.08' fig.1 r g b w 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 x y
4-3 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08'
4-4 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08'
5 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department 5. block diagram specification rev/date by c.y.chan r0/ 01.29.08'
lcd (cn1)led backlight (cn2): jst bhsr-02vs-1 pin no. symbol dgnd pin no. 1 symbol 34 avdd 1 a 2 k correspondable backlight connector : sm02b-bhss-1 pin no. symbol 46 clk used lcd cable : fpc , pitch 0.5mm , 50 pins , thickness 0.3mm. correspondable lcd connector : iriso imsa-9637s-50a-tb or compatible 2 vdd 6.internal pin connection 6 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08' 3 vdd 4 dgnd 19 b2 35 avdd 20 b1 6 dgnd 5 vgl 21 b0 38 r4 37 r5 36 agnd 7 vgh 22 nc 8 dgnd 23 nc 39 r3 10 lr 9 ud 24 dgnd 25 g5 42 r0 41 r1 40 r2 11 spena 26 g4 12 spck 27 g3 28 g2 43 dgnd 29 g1 44 dgnd 47 hs 48 vs 49 vcom 50 dgnd 14 nc 13 spda 15 dgnd pin no. symbol 16 b5 17 b4 18 b3 32 nc 33 agnd pin no. symbol 31 nc 45 de 30 g0
7.power supply 7 spec. no. :date : lm803-0 jan. 29, 2008 sheet no. : nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08'
jan. 29, 2008 sheet no. : lcd department specification 8.timing characteristics nan ya plastics corp. by rev/date elec. materials div. 8 spec. no. :date : lm803-0 c.y.chan r0/ 01.29.08'
60 90%rh 240 hrs appearance without defect 80 appearance without defect appearance without defect appearance without defect 6 thermal shock appearance without defect 10 cycles 5 low temp. operating display -20 240 hrs -20 , 30min. 70, 30min. (1cycle) 4 high temp. operating display 70 240 hrs appearance without defect 3 high temp. & high humi. storage 1 high temp. storage 2 low temp. storage condition -30 240 hrs 240 hrs 9.reliability test no. item 9-1 sheet no. : standard note wide temperature reliability test spec. no. :date : lm803-0 jan. 29, 2008 nan ya plastics corp. elec. materials div. lcd department specification rev/date by c.y.chan r0/ 01.29.08'
the initial purpose cracks display surface cracks difficult to achieve.
major defect dotssolder appearance loose lower the shorts practicality and erroneous operation faults which shorts substantially opens 0.4 4.outgoing inspection 4-1 inspection method mil-std-105e level regular inspection 4-2 inspection standard aql(%) remarks item inspection provision1.purpose the nan ya inspection provision provides outgoing inspection provision and its expected quality leve l basedon our outgoing inspection of nan ya lcd produces. 2.applicable scope the nan ya inspection provision is applicable to the arrangement in regard to outgoing inspection an dquality assurance after outgoing. 3.technical terms 3-1 nan ya technical terms 9-2 lm803-0 elec. materials div. date : jan. 29, 2008 nan ya plastics corp. specification spec. no. : lcd department sheet no. : rev/date r0/ by 01.29.08' c.y.chan
nan ya plastics corp. specification spec. no. : lm803-0 elec. materials div. date : jan. 29, 2008 lcd department sheet no. : 9-3 rev/date r0/ by c.y.chan *viewing area definition*inspection place to be 500 to 1000 lux illuminance uniformly without glaring. the distance between luminous source(daylight fluorescent lamp and cool white fluorescent lamp) and sample to be 30 cm to 50 cm. 4-3 inspection provisions 01.29.08' scratches, foreignand peeling color tone color unevenness appear to poseeffective use, and operation. almost noobstacle to the practicality, 0.4 0.65 faults which dimensions external fromdimensions solder appearance cold soldersolder projections minor defect inside the glass black spots dots pinhole, deformation matter, air bubbles, polarizing plate b fig. 1 a : zone viewing areab : zone glass plate outline a b a
3 contrast irregular fail 4 response time within specified value 1 non operational fail 2 miss operating fail *test and measurement are performed under the following conditions, unless otherwise specified. temperature 20 15 humidity 65 20%r.h. pressure 860~1060hpa(mmbar) in case of doubtful judgment, it is performed under the following conditions. temperature 20 2 humidity 65 5%r.h. pressure 860~1060hpa(mmbar) no. item criterion nan ya plastics corp. specification spec. no. : lm803-0 elec. materials div. date : jan. 29, 2008 lcd department sheet no. : 9-4 rev/date r0/ by c.y.chan should be no defective soldering such as shorting, loose terminal cold solder, peeling of printed circuit board pattern, improper mounting position, etc. 5-2 inspection standard for tft panel 01.29.08' (4) visual inspection on the operation condition for cosmetic shall be conducted at the distance 5-2-1 the environmental condition of inspection : the environmental condition and visual inspection shall be conducted as below. (1) ambient temperature : 255(6) ambient illumination : 100~200 lux for light on inspection. 5-1-2 components soldering : 5.specification for quality check 5-1-1 electrical characteristics : 30cm or more between the lcd panels and eyes of inspector. the viewing angle shall be 90 degreeto the front surface of display panel. (5) ambient illumination : 300~500 lux for external appearance inspection. (2) humidity : 25~75% rh(3) external appearance inspection shall be conducted by using a single 20w fluorescent lamp or equivalent illumination.
2 newton ring(touch panel) orbicular of interference fringes is not allowed in the optimum contrast within the active area under viewing angle. n Q 4 picture : not allowable mura it's ok if mura is slight visible through 6% nd filter.(judged by limit sample if it is necessary) functional failure (v-line/ h-line/cross line etc.) 1 c) dark dot : dots appear dark and unchanged in size in which lcd panel is displaying under 2 dots adjacent random dark dot n Q 2n Q 0 n Q 3 n Q 1 pure red, green, blue pattern. d) 2 dot adjacent = 1 pair = 2 dots sheet no. : 9-5 5-2-2 inspection criteria (1) definition of dot defect induced from the panel inside lm803-0 elec. materials div. date : jan. 29, 2008 nan ya plastics corp. specification lcd department a) the definition of dot : the size of a defective dot over 1/2 of whole dot is regarded as one defective dot. b) bright dot : dots appear bright and unchanged in size in which lcd panel is displaying under black pattern. spec. no. : by c.y.chan 01.29.08' rev/date (2) display inspection 2 dot adjacent 2 dot adjacent (vertical) random bright dot dot defect 2 dots adjacent total bright and dark dot r0/ no. item acceptable count 2 dot adjacent (slant)
fpc lead. electrical line or alignment mark can't be damaged. it is shown in fig.4. the distance of burr from the edge of tft / cf, w Q 0.3mm. it is shown in fig.5. 8 color irregular not remarkable color irregular. (1) 0.15 < d Q 0.5 mm, nQ 4 ; (2) d Q 0.15mm, ignore. it is shown in fig.6. (1) 0.05 2mm is ignored, l is ignored. it is shown in fig.2. fpc lead, electrical line or alignment mark can't be damaged. it is shown in fig.3. 1 panel crack not allow. it is shown in fig.1. 2 broken cf non-lead side of tft 3 broken lead sideof tft
fig.2. fig.3. fig.4. fig.1. spec. no. : lm803-0 elec. materials div. date : jan. 29, 2008 sheet no. : 9-7 fig.8. nan ya plastics corp. specification lcd department fig.7. notes 1. w : width2. l : length 3. d : average diameter 4. n : count 5. all the angle of the broken must be larger than 90. it is shown in fig.8. (r>90) by c.y.chan 01.29.08' fig.5. fig.6. rev/date r0/
? terms of warrant1. acceptance inspection period the period is within one month after the arrival of contracted commodity at the buyer's factory site .2. applicable warrant period the period is within twelve months since the date of shipping out under normal using and storage conditions. notice: ? safety1. if the lcd panel breaks, be careful not to get the liquid crystal to touch your skin. 2. if the liquid crystal touches your skin or clothes, please wash it off immediately by using soap andwater. ? handling 1. avoid static electricity which can damage the cmos lsi. 2. do not remove the panel or frame from the module. 3. the polarizing plate of the display is very fragile. so, please handle it very carefully. 4. do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate. 5. do not use ketonics solvent & aromatic solvent. use a soft cloth soaked with a cleaning naphtha solvent. ? storage 1. store the panel or module in a dark place where the temperature is 255 and the humidity is bel ow65% rh. 2. do not place the module near organics solvents or corrosive gases. 3. do not crush, shake, or jolt the module. nan ya plastics corp. specification spec. no. : lm803-0 elec. materials div. date : jan. 29, 2008 lcd department sheet no. : 9-8 01.29.08' rev/date r0/ by c.y.chan
c.y.chan 01.29.08' 10 rev/date r0/ by lm803-0 elec. materials div. date : jan. 29, 2008 10.outline drawing nan ya plastics corp. specification spec. no. : lcd department sheet no. : 1 2 1 2

▲Up To Search▲

Price & Availability of LVCC9Z803YS

	To Download LVCC9Z803YS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .